Dyno Accessories
QuikStik LC
Stuska introduces the QuikStik LC Control Throttle and Automatic Load Control as part of the […]
Dyno Accessories
Stuska introduces the QuikStik LC Control Throttle and Automatic Load Control as part of the […]
Engine Dyno Accessories
The Power Test Closed Loop Cooling System (CLCS) is a test cell ready, engine coolant […]
Engine Dyno Accessories
A water recirculation system should be considered if there is a limited capacity or excessive […]
Engine Dyno Accessories
The Engine Dynamometer Exhaust System uses an exhaust fan to pull cool make-up air into […]
Engine Dyno Accessories
The Power Test Mass Flow Fuel Measurement System is a mass measurement system that accurately […]
Engine Dyno Accessories
Cooling Towers are used in conjunction with a water recirculation system to remove heat generated […]
Engine Dyno Accessories
Power Test’s Remote Instrumentation Assembly is custom-built to your individual requirements. It is primarily used […]
Engine Dyno Accessories
Power Test’s Water Pressure Regulation System regulates the facility water pressure and dampens potentially damaging […]
Engine Dyno Accessories
The Power Test Engine-Mounted Torsionally Resilient Coupling is used to provide dampening of high-amplitude torsional […]
Engine Dyno Accessories
The Power Test Sub-base is a common mounting platform for the dynamometer and accessories. It […]
Engine Dyno Accessories
The Power Test Servo Inlet Manifold is used in place of a manual inlet valve […]
Engine Dyno Accessories
The Power Test Dynamometer-Mounted Torsionally Resilient Coupling is used when testing a comparatively small engine […]
Engine Dyno Accessories
Power Test offers a variety of portable and fixed fuel storage tanks to allow for […]
Engine Dyno Accessories
Power Test Wheeled Engine Cart system provides a stable, portable platform for quick placement of […]
Engine Dyno Accessories
Power Test offers a variety of custom-machined Flywheel Adapters. The adapter is connected directly to […]
Engine Dyno Accessories
Drive Shaft Guards are available from Power Test to meet any engine-to-dynamometer connection application. The […]
Engine Dyno Accessories
The Power Test Drive Shaft is used to connect an engine to the dynamometer. A […]
Engine Dyno Accessories
The hose interconnect kit consists of a variety of radiator hoses and accompanying clamps in selected […]
Engine Dyno Accessories
The Power Test Engine Cooling Column is a temperature-controlled, pressure-regulated recirculation tank that simulates the […]
Engine Dyno Accessories
The Power Test After Cooler Column is a temperature-controlled, pressure-regulated recirculation tank that replaces the […]
Engine Dyno Accessories
Power Test Charge Air Coolers replace the vehicular after-cooler for testing air to air after-cooled […]
Engine Dyno Accessories
The Power Test Electronic Analog “Smart” Throttle Actuator enables precision speed control on mechanically fueled […]
Engine Dyno Accessories
The Power Test Air-Starting System is mounted to the dynamometer and provides the cranking torque […]
Engine Dyno Accessories
The Power Test Quick Connect Drive Shaft Kits allow for a faster drive shaft connection […]
Engine Dyno Accessories
DC power supply designed to replace in-cell batteries
The DC Power Supply replaces in-test-cell batteries, eliminating battery maintenance and safety issues due to its […]
Transmission Accessories
The 450E-Series transmission test stand worktables include Short, Offset, V-Drive, as well as Extended options.
Transmission Accessories
The Powershift Transmission Drive kit assembles all the necessary components while connecting to the 450E’s main […]
Transmission Accessories
The Stall Brake Add-On uses an air actuated brake assembly installed into the Eddy Current […]
Transmission Accessories
The Eddy Lift Motor Kit adds motorized vertical positioning to the Eddy Current Load Unit’s […]
Transmission Accessories
The Eddy Current Load Unit connects to a transmission output to apply a load simulating […]
Transmission Accessories
The PowerNet Mounting Kit provides a means to attach a PowerNet component mounting (Commander PC, monitor, […]
Transmission Accessories
The Power Test Oil Preheat and Supply Cart provides an “at the ready” 60 gallon […]
Transmission Accessories
The Manifold Rectifier Block is a 0-200 gpm (0-757 lpm), as well as 0-6,000 psi (413 […]
Transmission Accessories
A precision Rotary Torque Transducer that pairs with the test stand. This allows for more precise […]
Transmission Accessories
The Universal Housing Support supports as well as secures and connects various pumps, motors, and […]
Transmission Accessories
A 360-degree power rotation for bell-housing mounted transmissions on the 450E test stand. This allows for easy access when setting up, […]
Transmission Accessories
The Control and Gauge Panel add-on is used to monitor and control the 450E transmission […]
Transmission Accessories
The Dual Centrifugal Oil Cleaning Circuit provides optimum oil cleansing. The circuit includes (2) Two […]
Transmission Accessories
Optional base extensions for angle-drive and v-drive transmissions are available should you need them for […]
Chassis Dyno Accessories
Power Test can provide an above ground installation kit with all EC-Series chassis dynamometers. The […]